Curiosity nearly completes 7-foot arm tests on Mars
Tests with the 7-foot (2.1-meter) arm have allowed the mission team to gain confidence in the arm’s precise maneuvering in Martian temperature and gravity conditions.
During these activities, Curiosity has remained at a site it reached by its most recent drive on Sept. 5. The team will resume driving the rover this week and use its cameras to seek the first rock to touch with instruments on the arm.
“We’re about to drive some more and try to find the right rock to begin doing contact science with the arm,” said Jennifer Trosper, Curiosity mission manager at NASA’s Jet Propulsion Laboratory in Pasadena, Calif.
Two science instruments — a camera called Mars Hand Lens Imager (MAHLI) that can take close-up, colour images and a tool called Alpha Particle X-Ray Spectrometer (APXS) that determines the elemental composition of a target rock — have passed preparatory tests at the rover’s current location.
The instruments are mounted on a turret at the end of the arm and can be placed in contact with target rocks.
Curiosity’s Canadian-made APXS had taken atmospheric readings earlier, but its first use on a solid target on Mars was this week on a calibration target brought from Earth. X-ray detectors work best cold, but even the daytime APXS tests produced clean data for identifying elements in the target.
“The spectrum peaks are so narrow, we’re getting excellent resolution, just as good as we saw in tests on Earth under ideal conditions,” said APXS principal investigator Ralf Gellert of the University of Guelph in Guelph, Ontario, Canada.
“The good news is that we can now make high-resolution measurements even at high noon to support quick decisions about whether a sample is worthwhile for further investigations,” the scientist added.
The adjustable-focus MAHLI camera this week has produced sharp images of objects near and far.
MAHLI is also aiding evaluation of the arm’s ability to position its tools and instruments.
Curiosity moved the arm to predetermined “teach points” Sept. 11, including points above each of three inlet ports where it will later drop samples of soil and powdered rock into analytical instruments inside the rover. Images from the MAHLI camera confirmed the placements. Photos taken before and after opening the inlet cover for the chemistry and mineralogy (CheMin) analytical instrument also confirmed good operation of the cover.
A test last week that checked X-rays passing through an empty sample cell in CheMin worked well. It confirmed the instrument beneath the inlet opening is ready to start analyzing soil and rock samples.